Gecko [ c.stage.kornherr.net ]

Linux v69820.1blu.de 4.15.0 #1 SMP Mon Sep 30 15:36:27 MSK 2024 x86_64
Apache/2.4.58
Server IP : 195.90.215.149 & Your IP : 216.73.217.80
Domains : Cant Read [ /etc/named.conf ]
User : www-data

Name	Size	Permission	Date
EnableSeq.conf	758 B	-rw-r--r--	2023-09-01 15:36
HeadPhones.conf	392 B	-rw-r--r--	2023-09-01 15:36
IN1-HeadsetMic.conf	419 B	-rw-r--r--	2023-09-01 15:36
IN1-InternalMic.conf	389 B	-rw-r--r--	2023-09-01 15:36
IN2-HeadsetMic.conf	419 B	-rw-r--r--	2023-09-01 15:36
IN2-InternalMic.conf	389 B	-rw-r--r--	2023-09-01 15:36
MonoSpeaker.conf	1.26 KB	-rw-r--r--	2023-09-01 15:36
Speaker.conf	426 B	-rw-r--r--	2023-09-01 15:36

Rename

SectionDevice."Speaker" {
	Comment "Mono Speaker"

ConflictingDevice [
		"Headphones"
	]

EnableSequence [
		# BYT/CHT devices with an ES8316 codec use a single speaker
		# connected between the headhpone LOUT and ROUT pins, expecting
		# the output to be in a mono differential mode. Presumably this
		# is done to use the power of both the left and right headphone
		# amplifier channels to allow the speaker to be louder.
		#
		# The ES8316 codec does not have a differential output mode, but
		# we can emulate one by making both channels output the exact
		# same signal by setting the "DAC Mono Mix Switch", combined
		# with setting the "Playback Polarity" control to "R Invert",
		# which applies a 180 degrees phase inversion to the right chan.
		cset "name='DAC Mono Mix Switch' on"
		cset "name='Playback Polarity' 1"

cset "name='Speaker Switch' on"
	]

DisableSequence [
		cset "name='Speaker Switch' off"
		# DAC settings back to normal for stereo headphones output
		cset "name='Playback Polarity' 0"
		cset "name='DAC Mono Mix Switch' off"
	]

Value {
		PlaybackPriority 100
		PlaybackPCM "hw:${CardId}"
		# The es8316 only has a HP-amp which is muxed to the speaker
		# or to the headpones output
		PlaybackMixerElem "Headphone Mixer"
		PlaybackMasterElem "DAC"
	}
}